Composition: Low density and high density polyethylene, sanitary approved for food packing use. Color: Natural, white or colored, not printed or printed in 1-2 colors, according to the model

Types and size:

Lateral soldure bags:

Size	M.U.	Values	Tolerance
Width	mm	120 - 400 401 - 600	+/-  5 mm +/- 10 mm
Length	mm	150 - 600	+/- 10 mm
Thickness *	mm	0,010 - 0,080	+/- 10 % avg.

* For high density polyethylene bags - thickness: 0,010 - 0,030 mm.
   For low density polyethylene bags - thickness 0,025 - 0,080 mm.

Bottom soldure bags:

Size	M.U.	Values	Tolerance
Width	mm	120 - 400	+/-  5 mm
Length	mm	150 - 600 - 1200	+/- 10 mm
Thickness	mm	0,02 - 0,200	+/- 10 % avg.

Individual bags:

Size	M.U.	Values	Tolerance
Total width of bag as it is bent on the extruder	mm	400 - 800 801 - 1000	+/- 10 mm +/- 15 mm
Length of bag	mm	400 - 800 801 - 1200 1201 - 2100	+/- 10 mm +/- 15 mm +/- 20 mm
Bending	mm	50 - 300	+/- 10 mm
Roll width	mm	250 - 500	+/- 15 mm
Thickness *	mm	0,010 - 0,080	+/- 10 % avg.

* For high density polyethylene bags - thickness: 0,010 - 0,030 mm.
   For low density polyethylene bags - thickness 0,020 - 0,080 mm.
   For printed bags with cutting mark, the following lengths are possible: 400, 450, 500, 550, 600, 650, 700, 760, 910, 1000 mm

Usage: Packing and transporting different kind of products: food, textiles, chemicals.

Packing: It is done according to the client, in carton or polyethylene covering.

Storage: The bags are kept in closed, clean and dry warehouses, being kept away from the direct action of sun light, at min. 2 meters from any heat source. Storage conditions: temperature 15-25 C degrees, humidity 10-65%.

Transportation: It will be done using covered and clean vehicles, in order to ensure the integrity of the rolls.